Forums

Moderators: Chris, transcend
Author Post
Karlos
Wed Aug 20 2008, 05:52PM
Registered Member #163
Joined: Sun Mar 16 2008, 01:35AM
Posts: 13
from an empty rack create the following devices in this order.
mixer 14:2, NN-19, Mclass compressor, redrum, spider audio splitter/merger
on the nn19 load the patch orchstrpad from the factory soundbank - nn19 - strings
program a chord sequence into nn19s track on the sequencer
load a kick drum into redrum ch1 and program hits on 1,5,9 and 13
press tab to see back and wire a cable from redrum ch1 to spider splitters input. spider splitter output 1 to mixer channel 14 and splitter output 2 to mclass sidechain input.
on the compressor set threshold to -36db, ratio: infinite:1, attack: 1ms, release: 250ms. press play and the chord seq should duck everytime the kick hits, pressing mute on redrum ch1 stops the sidechaining. this gives the kick some room to breathe, try it on basslines. hope this helps
Back to top
DangerDaz
Fri Nov 14 2008, 06:29AM
Registered Member #199
Joined: Sun May 18 2008, 01:10AM
Posts: 32
Thanks mate.

Will definitely be giving this a try.
Back to top
Website
 

Jump:     Back to top

Syndicate this thread: rss 0.92 Syndicate this thread: rss 2.0 Syndicate this thread: RDF
Powered by e107 Forum System